Diamond Systems PR-Z16-LC-ST Computer Hardware User Manual


 
Prometheus-LC CPU User Manual V1.0 Page 5
2. FEATURES
System Features
Processor Section
486-DX2 processor running at 100MHz with co-processor
Pentium class platform including burst-mode SDRAM and PCI-based IDE controller and USB
16MB SDRAM system memory
50MHz memory bus for improved performance
1MB 16-bit-wide flash memory for BIOS and user program storage
8KB unified level 1 cache
I/O
4 RS-232 serial ports, 115.2kbaud max
- 2 ports are 16550-compatible with 16-byte FIFOs
- 2 ports are 16850-compatible with 128-byte FIFOs
2 full-featured powered USB 1.1 ports
1 ECP-compatible parallel port
Floppy drive connector
IDE drive connector (44-pin version for notebook drives)
Accepts solid-state flashdisk modules directly on board
IrDA port (requires external transceiver)
PS/2 keyboard and mouse ports
Speaker, LED, and Reset connections
System Features
Plug and play BIOS with IDE autodetection, 32-bit IDE access, and LBA support
Built-in disk emulation for OS and file storage in on-board flash memory
Built-in fail-safe boot ROM for system recovery in case of BIOS corruption
Serial console capability eliminates need for video board and monitor
On-board lithium backup battery for real-time-clock and CMOS RAM
ATX power switching capability
Watchdog timer with hardware and software trigger and programmable delay
Power surge monitor for fail-safe operation
Zero wait-state capability for flash memory and PC/104 bus
+5V-only operation
Extended temperature range operation (-40 to +85
o
C)
Cable-free assembly when used with Diamond Systems’ PNL-Z32 Panel I/O board