Filter
Top Products
Install Guide
Model: MIL-910H 3
1. Power (GREEN) Indicator
When the power LED is lit, it indicates that the hub’s power is on.
2. Collision (RED) Indicator
This LED indicator blinks when the hub detects a collision on the network.
3. Link/Transmit (GREEN) Indicators
These LEDs Indicator light green when the respective connection is okay. A
blinking LED indicates that transmission is occurring on the segment.
4. Polarity/Receive (YELLOW) Indicators
These LEDs Indicator light red when data wires have been reversed (the
polarity has been reversed) A blinking LED to indicates data is being received
on the segment.
5. Partition Indicators
Partition is indicated by the alternate flashing of the green and yellow LEDs
Figure 2
1. RJ-45 UTP Ports
The Hub is equipped with 8 RJ-45 UTP ports for making 10BASE-T hub-to-
workstation connections.
2. Cascade Enable Slide-Switch
Slide this switch to the right to enable cascading with straight UTP cables.
3. AC Adapter Port
Plug the AC adapter jack into this port
4. BNC Port
The Hub is equipped with one BNC port for making 10BASE2 hub-to-
workstation connections
567
9
Normal Cascade
DC 7.5V
12348