Filter
Top Products
Alerts and Notifications
Chapter 5 53
Traps
There are additional traps that can be set at the port level. The following table
shows where the trap is under Serial port > Configuration on the web
interface, trap name, configure options, and the trap functions. The MIBs for
login traps can be found at http://ftp.digi.com/support/utilities/digicm/
Trap Location Trap Name Function
Port access menu Port login trap
Notify about any login
action to the port
access menu
(succeed and fail)
Alert configuration Port login trap
Notify about login to
this specific port
(succeed and fail)
(only available if host
mode is set to
"Console server")
Alert configuration
Device
connection trap
Notify about a change
of the DTR signal line
(only available if host
mode is set to
"Console server")
Alert configuration
Active detection
trap
Notify about changes
in the device’s
response to the probe
string (see also
"Automatic Device
Recognition" on page
19, only available if
host mode is set to
"Console server")
Alert configuration
Dial-in modem
test trap
Notify about modem
test (succeed and fail)
(only available if host
mode is set to "Dial-in
modem")
Port event handling
Keyword
notification trap
Notify about the
occurrence of a
keyword in the port
log
(only available if host
mode is set to
"Console server")