Filter
Top Products
Adding a PC Modem
88 Chapter 11
and Version can be used, or specified separately.
The Trap MIB can be downloaded from support.digi.com (select your
product and go to Diagnostics, Utilities and MIBs).
6. Click Save & apply.
Adding a PC Modem
A PC card slot is provided on the front panel of the Digi CM. The graphic below
has an arrow indicating the PC card slot.
To install and configure the PC modem on the Digi CM, do the following.
1. Insert the card into the PC slot.
2. Access the web interface.
3. From the menu, choose Configuration under the PC card heading.
4. Choose Discover a new card.
The Digi CM searches for a PC card and displays a configuration menu.
5. Enter the appropriate parameters in the configuration menu.
6. Click Save & apply.
Configuring For Dial-In Terminal Server Access
The host mode Dial-In Terminal Server is identical to the host mode Terminal
Server but allows you to configure a modem init string. In this mode an
incoming modem connection is automatically connected to an IP address.
To configure a serial port for a dial-in terminal server access, enter the values
for these fields: Host mode, Destination IP, Base Port, Protocol, Inactivity
timeout, and Modem init string. To access the Host mode configuration
screen, do the following:
1. Access the web interface.
2. Under the Serial port heading, choose Configuration.
3. Choose a specific port under Individual port configuration and then choose
Host mode configuration.
PC card slot
Digi CM 32 shown