Filter
Top Products
AAUUDDIIOO
VVOOLLUUMMEE
: 0–15
BBAASSSS
: ON OFF
MMUUTTEE
: ON OFF
HH//PP
: A-CH B-CH — This setting allows the use of 2 headphones on
different frequencies. If two video units are installed and; for example,
each unit is playing a different video, using two headphones set at the
same frequency may result in interference of the audio signal between the
two headphones. One of the video units should be set to A-CH and the
other to B-CH. A-CH is 2.3MHz left and 2.8MHz right, B-CH is 3.2MHz left
and 3.8MHz right. Ensure that the headphones being used are of different
receive frequencies, or are capable of 2-channel reception.
MMOODDEE
NNOOTTEE::
In the Mode selection use the
S/T
buttons to select the desired setting and
press SEL to set the selected video mode.
FFUULLLL ——
A 4:3 picture is enlarged in the horizontal
direction only, enabling viewing of a 4:3
picture (standard picture) without any clipping of
the picture.
44::33 ——
Standard picture mode.
WWIIDDEE ——
A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally. This setting
is ideal for cinema-sized pictures (wide-screen).
DDIISSPP
PPAALL//NNTT
: PAL NT — video format (PAL or NTSC)
UUPP//DDNN
: UP DN — picture is inverted
LLEETT//RRIITT
: LET RIT — picture is mirrored imaged (left-right swapped)
1100
© 2004 Directed Electronics, Inc.