Filter
Top Products
MMuullttiippllee AA//VV IInnppuutt SSeelleeccttoorr
Refer to diagram on the next page for the discussion that follows:
CCOONNNNEECCTTIINNGG AA MMOONNIITTOORR TTOO MMUULLTTIIPPLLEE SSOOUURRCCEESS
When the monitor(s) power is turned on the input source will appear in the upper
right hand corner (AV1, AV2, etc.). Press the SOURCE button on the remote to
switch between the available sources for that monitor.
NNOOTTEE::
If PARKING is displayed on the screen, it means that this monitor(s) will not
display video until the parking brake is set (vehicle parked).
NNOOTTEE::
You cannot change sources on video output 3 using the source selector, Only
the remote will switch #3 output between the 3 video inputs.
For operating convienence, when the system is connected to several other devices
which have their own remotes, you can use those remotes through the HVM702 to
operate the other devices. This is done by connecting the Remote Eye IR interface
cable from the other devices to the R(emote) Sensor Input at the VS102 video
selector.
1144
© 2004 Directed Electronics, Inc.