Filter
Top Products
1144
© 2005 Directed Electronics—all rights reserved
DDIISSPPLLAAYY MMOODDEE ((FFOORRMMAATT))
Press the Menu button on the remote or on the control panel, the OSD menu will
display on the LCD screen as shonw below (left figure), press the up/down button
on the remote or the up/down button on the control panel to select "FORMAT" set-
ting. The "FORMAT" setting will display as shown below (right figure).
RREESSEETT IIMMAAGGEE
Press the Menu button on the remote or on the control panel, the OSD menu will
display on the LCD screen as shown below (left figure), press the up/down button
on the remote or the up/down button on the control panel to select "RESET" set-
ting. Press the power button on the control panel to select the “RESET” setting.
The "RESET" setting will show as below (right chart).
IInnssttaallllaattiioonn NNootteess
The HVM700 Monitor includes mounting options described in the following sections.
Before you install the monitor, read the following important notices:
1. NEVER install this monitor where it can be viewed from the driving position
this is a violation of many state and local vehicle codes.
2. Avoid mounting locations where there is a risk of impact with a passenger in
the event of an accident.
3. Always mount the monitor securely using the mounting hardware that is pro-
vided. Do not use the monitor unless it is properly secured to the vehicle.