Filter
Top Products
IInnssttaallllaattiioonn——SSeeaatt HHeeaadd RReesstt
The kit includes a protective trim ring and an optional spacer ring for use when the
mounting surface is uneven.
1. Select appropriate locations in your vehicle for the monitor.
2. Be sure there is sufficient depth for the trim ring. Add the spacer ring for
shallow locations with uneven curved surfaces such as upholstery. Be sure
there is enough space for both the trim ring and for any excess interconnect
cable.
3. Ensure that the interconnect cable will reach from the monitor location to the
power supply module.
4. Create the required opening for the monitor and trim ring. Be sure it is not
too large, and that there is enough space behind the trim ring to store any
excess interconnect cable. Excess cable does not fit within the trim ring.
5. Route the cable through the opening in the trim ring:
6. Mount the trim ring with the screws provided.
7. Connect the cable to the monitor.
8. Securely snap the monitor into place.
CABLE
BLACK
66
© 2005 Directed Electronics—all rights reserved