Filter
Top Products
16
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Standard 802.11g support, no enhanced capabilities.
Capable of Packet Bursting, FastFrames, Compression, and
no Turbo mode.
Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo. This setting is backwards compatible with
non-Turbo (legacy) devices. Dynamic Turbo mode is only
enabled when all nodes on the wireless network is Super G
with Dynamic Turbo enabled.
Capable of Packet Bursting, FastFrames, Compression, and
Static Turbo. This setting is not backwards compatible with
non-Turbo (legacy) devices. Static turbo mode is always on
and is only enabled when all nodes on the wireless network is
Super G with Static Turbo enabled.
Set a specific transmission rate. It is strongly recommended
to set to Auto.
Select Enabled if your network uses all 802.11g devices. Select
Disabled if you are using a mixure (802.11b and 802.11g) of
wireless devices.
Choose Enabled to broadcast the SSID across the network.
All devices on a network must share the same SSID (Service
Set Identifier) to establish communication. Choose Disabled if
you do not wish to broadcast the SSID over the network.
Select WEP, WPA-EAP, or WPA-PSK authentication.
Super G without
Turbo:
Super G with
Static Turbo:
Super G with
Dynamic Turbo:
SSID Broadcast:
Security Mode:
Transmission
Rate:
802.11g-Only
Mode:
Disabled: