Filter
Top Products
52D-Link DIR-615 User Manual
Time Settings
Select the Time Zone from the drop-down
menu.
To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and
an end date for daylight saving time.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. Check this box to use a NTP
server. This will only connect to a server on the
Internet, not a local server.
Enter the NTP server or select one from the
drop-down menu.
To manually input the time, enter the values
Minute, and Second and then click .
You can also click
.
ime Zone:
Daylight Saving:
Enable NTP
Server:
NTP Server Used:
Manual:
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also