Filter
Top Products
74D-Link DIR-615 User Manual
Section 4 - Security
Configure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(192.168.0.1). Click on and then click Wireless
on the left side.
2. Next to
Security Mode, select .
3. Next to WEP Key Length, select the level of encryption
(64 or 128-bit).
- (recommended) Letters A-F and numbers 0-9
are valid.
4. Next to WEP Key 1, enter a WEP key that you create.
Make sure you enter this key exactly on all your wireless
devices. You may enter up to 4 different keys.
5. Next to Authentication, select .
6. Click to save your settings. If you are
connectivity until you enable WEP on your adapter and
enter the same WEP key as you did on the router.