Filter
Top Products
66
DNS Relayer Settings
Click on Servers in the menu bar, and then click DNS Relay below it. The DFL-700
contains a DNS relayer that you can be configured to relay DNS queries from the internal LAN
to the DNS servers used by the firewall itself.
Enable DNS Relayer
Follow these steps to enable the DNS Relayer.
Step 1. Enable by checking the Enable DNS Relayer box.
Step 2. Enter the IP numbers that the DFL-700 should listen for DNS queries on.
Note: If “Use address of LAN interface” is checked, you don’t have to enter an IP in IP
Address 1 as the firewall will know what address to use.
Click the Apply button below to apply the setting or click Cancel to discard changes.