Filter
Top Products
9
The NetWare server will now automatically load/bind the driver.
If the driver files have already been copied to your system’s Netware directory and you simply wish to load
them:
1.
Start the NetWare Server by typing in the following commands:
CD \NWSERVER
SERVER
.
2.
After booting up, type the following command:
NWCONFIG
3.
Select "Driver Options"
→
"Configure network drivers"
→
"Select a driver".
4.
Select "DLKGE.LAN ...." in the Select a driver windows.
5.
Specify "SLOT" and "Node Address" if necessary.
6.
Select "Save parameters and load driver" after configuring the adapter settings.
The NetWare server will now automatically load/bind the driver.
Next, you will need to modify your NetWare 5.0 Server’s Autoexec file. To do so, please follow these steps:
1.
Start the NetWare Server by typing in the following commands:
CD \NWSERVER
SERVER
.
2.
From the Novell Server side, type the following command:
NWCONFIG
3.
Select <NCF files options>.
4.
Select <Edit AUTOEXEC.NCF file>.
5.
Add the following items into the server's AUTOEXEC.NCF file: