Filter
Top Products
29
Please note that there must be no space or other characters
between the user ID, password and the MAC address. The MAC
address could be omitted, but the trailing comma must be
retained. A user ID should be between 1 to 32 characters and
the password should be between 0 to 20 characters. Special
characters are not allowed for user name and password.
Using the Configuration Utility (continued)
Home > User Manager > Management Type > Local > Local Users List
Upload User Accounts:
Besides adding user accounts one by one through the Web
interface, you can prepare a text file, which contains user account
information, store it on your hard drive and then upload it to the
DSA-3100.
Each line of the text file can be in one of the following two formats:
After you have created the text file for the user account as
described above, click Upload User Accounts as shown in the
illustration at the top of this page. Click Browse and highlight the
text file you have created.
Click Refresh for the latest information. Click Apply to update
your changes.
Caution: When adding user accounts by uploading a file, existing ac-
counts with the same ID will be replaced by the new ones.