Filter
Top Products
14
DWL-G650M User’s Manual
D-Link Systems, Inc.
Using the Configuration Utility
SSID:
Wireless Mode:
Channel:
Tx Rate:
The Service Set Identifier is the name assigned to the wireless
network. The factory SSID setting is default.
Either Infrastructure or Ad-Hoc will be displayed here. (Please see
the
Getting Started
section in this manual for an explanation of these
two modes.)
The channel selection is automatically determined by the
DWL-G650M. When in Ad-Hoc mode, you may select a channel
manually. The default channel is 6.
Configuration
The default setting is Auto. These settings are automatically
determined for the maximum wireless signal rate.
Preamble Type - By default the preamble is set to
Short and Long
Preamble
. The preamble defines the length of the CRC block
(Cyclic Redundancy Check) used in communication between the
access point and the wireless network adapters. CRC is a common
technique for detecting data transmission errors. High traffic
networks should use the shorter preamble type. The
DWL-G650M will automatically determine the best Preamble length.
Continuous Access Mode is the default setting. For best results leave
this setting at the default.
Power Mode:
Preamble: