Filter
Top Products
25D-Link WBR-2310 User Manual
Section 3 - Configuration
Check the box to enable the wireless function. If you do not want to use
wireless, uncheck the box to disable all the wireless functions.
Service Set Identifier (SSID) is the name of your wireless network. Create
a name using up to 32 characters. The SSID is case-sensitive.
Indicates the channel setting for the WBR-2310. By default the channel
is set to 6. The Channel can be changed to fit the channel setting for
an existing wireless network or to customize the wireless network. The
Auto Channel Scan setting can be selected to allow the WBR-2310 to
choose the channel with the least amount of interference.
Super G is a group of performance enhancement features that increase
end user application throughput in an 802.11g network. Super G is
backwards compatible to standard 802.11g devices. For top performance,
all wireless devices on the network should be Super G capable. Select
either Disabled, Super G without Turbo, Super G with Dynamic Turbo.
• Disabled - Standard 802.11g support, no enhanced capabilities.
• Super G without Turbo - Capable of Packet Bursting, FastFrames, Compression, but no Turbo mode.
• Super G with Dynamic Turbo - Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo.
This setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled
when all devices on the wireless network are Super G with Dynamic Turbo enabled.
Extended Range Mode helps reduce dead spots by improving the reception algorithm, which allows your wireless clients to
associate with the WBR-2310 at farther distances. Check the box to enable it.
Enable this mode if your network is made up of purely 802.11g devices. If you have both 802.11b and 802.11g wireless
clients, uncheck the box.
Check this option if you would not like the SSID of your wireless network to be broadcasted by the WBR-2310. If this option
is checked, the SSID of the WBR-2310 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your WBR-2310 in order to connect to it.
Enable Wireless:
Wireless Channel:
Super G Mode:
Wireless Settings
Extended Range
Mode:
Wireless Network
Name:
802.11g Only
Mode:
Enable Hidden
Wireless: