Filter
Top Products
28
Troubleshooting the USB Installation (continued)
c After you remove the extra bindings, uninstall the cable modem,
following the instructions in this user’s manual.
d Reboot the computer and re-install the cable modem, following the
instructions in this user’s manual.
e Release and renew the computer’s IP address.
To release and renew the IP address for the Windows 98 and
Windows Me operating systems:
1 Click Start and click Run.
2 Type winipcfg in the Open field and click OK. The IP
Configuration screen appears.
3 In the Ethernet Adapter Information group area, click the
drop down arrow and select the D-Link cable modem.
4 Click Release. The IP address changes to 0.0.0.0.
5 Click Renew. Windows refreshes the IP address. The
refreshed address may or may not be the same as the
original IP address.
6 Click OK to return to the Windows desktop.
To release and renew the IP address for the Windows
2000 and Windows NT 4.0 operating systems:
1 Click Start and select Programs, then Accessories.
2 Click Command Prompt.
3 At the command prompt (C:\), type ipconfig/release and
press Enter. Windows releases the IP address.
4 At the command prompt type ipconfig/renew. Windows
renews the IP address.
5 At the command prompt (C:\), type exit and press Enter to
return to the Windows desktop.