Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
100 Using the Console Interface
2. Define which ports will be active members of the VLAN.
A port can transmit packets onto only one VLAN. It can
receive packets (be a passive member) on many VLANs.
Active VLANs are designations are defined by
assigning Port VLAN ID numbers (PVIDs) in the
Configure Port VLAN ID screen.
3. Define the VLAN itself and which ports will be
members (able to receive packets from a port that has
this PVID number). At this point, you need to designate
whether a member port will be a Tagging or Untagging
member port. Defining the ports that will be members
of a VLAN, and whether they will TAG or Untag packets
is done in the Configure Static VLAN Entry screen.
Choose Configure 802.1Q VLAN on the VLAN
Configuration screen (under Configure VLAN of the
Configuration menu) to access the 802.1Q VLAN
Configuration menu:
Figure 6-29. 802.1Q VLAN Configuration menu
Choose Configure Port Ingress Filter to access the first
item on the menu. The following screen appears: