Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
116 Using the Console Interface
Port Traffic Statistics
To access the second item on the Traffic Statistics menu,
choose Port Traffic Statistics. The following table appears:
Figure 6-43. Port Traffic Statistics screen
Select the desired setting in the Ports field: 1 to 4, 5 to 8, 9
to 12, 13 to 16, 17 to 20, 21-S1P2, or Slot 2 and the desired
increment setting in the Update Interval field: 2 sec, 5 sec,
15 sec, 30 sec, 1 min, or Suspend.
The statistic counters displayed are defined as follows:
♦ Speed If the link is up, the speed and duplex status will
be displayed; if the link is down “-” will be displayed.
♦ % Utilization This shows the percentage of available
bandwidth each port is using over the amount of time
specified by the update interval. For example, when a 10
Mbps port is relaying packets at 5 Mbps, the utilization
is 50%.