Filter
Top Products
53D-Link DGL-4500 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Enter the new password for the User login. If you login as the User,
you can only see the settings, but cannot change them.
Enter a name for the DGL-4500 router.
Enables a challenge-response test to require users to type letters or
numbers from a distorted image displayed on the screen to prevent
online hackers and unauthorized users from gaining access to your
router’s network settings.
Check this option to enable HTTPS server through remote
management.
Remote management allows the DGL-4500 to be configured from
the Internet by a web browser. A username and password is still
required to access the Web-Management interface. In general, only
a member of your network can browse the built-in web pages to
perform Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host.
The port number used to access the DGL-4500.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address
of the DGL-4500 and 8080 is the port used for the Web Management
interface.
This section will list any rules that are created. You may click the Edit
icon to change the settings or enable/disable the rule, or click the
Delete icon to remove the rule.
Admin Password:
User Password:
Gateway Name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Remote
Management:
Remote Admin Port:
Inbound Filter:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while User has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.