Filter
Top Products
3
3
3
3
Figure 25 – System > Port Setting
Speed:
Fiber connections can operate in Forced Mode settings
(1000M Full), Auto, or Disable. Copper connections can operate in
Forced Mode settings (100M Full, 100M Half, 10M Full, 10M Half),
Auto, or Disable. The default setting for all ports is Auto.
NOTE: Be sure to adjust port speed settings appropriately after
changing connected cable media types .
Flow Control: This setting determines if the Switch handles flow
control. Set to Enable to avoid data transfer overflows. Default setting
for all ports is Disable.
NOTE: When user enable flow control at the first time, the
message will pop up.
.