13
ISP Additional Settings (PPPoE Settings)
You can configure the router to use additional ISP settings. Some ISPs
require PPPoE for authentication purposes.
Do the following to set up PPPoE:
User name: Enter the user name of your ISP account.
Password: Enter the password of your ISP account.
Retype password: Enter the password of your ISP account again to re-
confirm.
Some ISPs use Host Name and Domain Name to authenticate the user; if this
is the case, you need to enter:
Host Name: Enter the name of the gateway.
Domain Name: Enter the domain name provided by your ISP
Some ISP require you input the LAN card Mac address; if this is the case,
you need to enter:
Mac Address: Enter this LAN card Mac address.
Note: Some ISPs may recognize your LAN card Mac address as a legal user;
in this case, you have to copy the LAN card Mac address in the Mac address
field.
For WIN 95/98 you can run winipcfg to see the LAN card Mac address.
For WIN/NT you can run ipconfig/all to see the LAN card Mac address.