Filter
Top Products
14D-Link DIR-605L User Manual
Section 3 - Conguration
Choose Dynamic IP Address to obtain IP Address information
automatically from your ISP. Select this option if your ISP does
not give you any IP numbers to use. This option is commonly
used for Cable modem services.
The Host Name is optional but may be required by some ISPs.
The default host name is the device name of the Router and
may be changed.
The default MAC Address is set to the WAN’s physical interface
MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by
your ISP.
The default MAC address is set to the WAN’s physical interface
MAC address on the Broadband Router. You can use the “Clone
MAC Address” button to copy the MAC address of the Ethernet
Card installed by your ISP and replace the WAN MAC address
with the MAC address of the router. It is not recommended that
you change the default MAC address unless required by your ISP.
Enter the DNS (Domain Name Server) server IP address assigned
by your ISP.
Dynamic IP
Address:
Host Name:
MAC Address:
Internet Setup
Dynamic
Clone MAC
Address:
DNS
Addresses:
MTU:
Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specic ISP.
Access Point
Mode:
Checking this box disables NAT and turns the Router into an
Access Point only.
To manually set up the Internet connection, click the Manual Internet Connection Setup button on the Router’s opening
window.
DIR-605L