Filter
Top Products
56D-Link DIR-825 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login Name.
The administrator can make changes to the settings.
Enter the new password for the User login. If you login as
the User, you can only see the settings, but cannot change
them.
Enter a name for the DIR-825 router.
Check to enable HTTPS to connect to the router
securely.
Remote management allows the DIR-825 to be configured
from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator
tasks from the remote (Internet) host.
The port number used to access the DIR-825.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet
IP address of the DIR-825 and 8080 is the port used for the
Web Management interface. If you have enabled HTTPS
Server and checked Use HTTPS, you must enter https://
as part of the URL to access the router remotely.
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule,
or click the Delete icon to remove the rule.
Admin Password:
User Password:
System Name:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Inbound Filter:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.