Filter
Top Products
14
When I switch between computers, mouse movement
becomes random. What can be the cause?
One of the following may be the case:
Verify that your computers do not have more than
one mouse driver installed. Make sure that the driver
is for a standard PS/2 or fully Microsoft compatible
PS/2 mouse. Also check with the mouse vendor to
verify you are using the latest mouse driver.
Check your config.sys and autoexec.bat files (if you
run Windows that is) and verify that only one mouse
driver is loaded.
If a special mouse is used, such as a cordless or
scrolling mouse, make sure you use generic PS/2
mouse drivers. A non-standard PS/2 mouse may
have extensions on the PS/2 protocol that are not
supported by the DKVM-2/4 unit.
Do not move the mouse or press any mouse buttons
while switching from one system to the other.
Try resetting the mouse by unplugging it from the
DKVM-2/4 unit for about 3 seconds. Mouse
movement will now be correct again.
Before booting up any PCs, the DKVM-2/4 unit must
be powered-up. But before powering the DKVM-2/4
unit up, the mouse and keyboard must be
connected. Any deviation from this power-up
sequence may lead to erratic behavior of the
systems.
V
IDEO
The image on my monitor is not clear. What can be the
cause?
One of the following may be the case: