Filter
Top Products
5
Step 3.
Connect your PS/2 keyboard and PS/2 mouse to
the front panel of the DKVM-2/4. The connections
should be made to the two 6-pin Mini DIN
connectors labeled =CONSOLE= as shown below.
Step 4.
Now the PC connections will be made with the
monitor (VGA) connections. Connect a VGA cable
(15-pin HDDB Male / Male) with the Male side to
both the PC and to the connector labeled VGA on
the rear panel of the DKVM-2/4 unit. Repeat this
for all PCs.