Filter
Top Products
10
Setting up the DP-G321
Installing the Print Server
WARNING: Configuration problems may result if the Print Server is powered up without
first establishing its network connection. Follow this procedure to avoid complications at
the configuration stage.
Confirm proper operation of your printer before connecting the DP-G321.
1.
When you have confirmed proper operation of your USB or parallel printer, turn
your printer power OFF.
2.
Confirm that your network is operating normally.3.
Connect the DP-G321 to your network, using a straight-through CAT5 cable.
4.
While the printer is powered OFF, use the USB or parallel printer cable to con-
nect the DP-G321 to your printer.
5.
Switch ON your USB or parallel printer.
6.
Plug the DC power adapter into the DC 5V power socket on the rear panel of
the Print Server.
7.
Plug the power adapter into a power outlet. This will supply power to the
DP-G321, as it has no external power switch. The green Power LED on the
Print Server’s front panel should illuminate steadily, and the Print Server’s
Self-Test will proceed.
8.