Filter
Top Products
65
Select from the list of NTP (Network Time Protocol) time servers. Then select the
time zone that you are in and click on Apply to save.
Remote Log
The Log dialog allows you to view and configure the log. To view the log, click on
the View System Log button.
Below is the System Log screen which shows the date/time of the log, the facility
that was logged, the severity level and the log message. Click on Refresh to view
any new information that is logged.
NOTE: When you
click on the View System
Log button, the System
Log screen that you access
will be located under the
Status section (see screen
on left). To return to the
previous screen to
configure system log,
remember to click on the
Tools tab (located on top
row) first and then click on
Remotelog.
System Log when log
mode is ENABLED
System Log when log
mode is DISABLED