D-Link DSL-302G Network Card User Manual


 
4. Click on the Internet Protocol item in the list box.
5. Click on the Properties button. The Internet Protocol (TCP/IP) Properties window is displayed:
6. Enter the details of the DSL-302G in the Use the following IP address group box:
IP address
Subnet mask
Default gateway
7. Click on OK.
8. Click on OK again to close the remaining open dialog box. The Ethernet Client driver has now been
configured. It is advisable to check that the Ethernet driver has been configured correctly by pinging the IP
address of the DSL-302G from a Command Prompt window.