Filter
Top Products
Double-click on the MAC
address of the DSL-302G or
highlight it and press the Enter
or Return key.
You should now be prompt for
the password. The default
password is “admin”.
Click on the General ADSL
Information tab. The new menu
lists 8 channels available for
configuration. You need to
change settings for only one
channel in order to use the ADSL
modem. Click on the first
channel listed to highlight it, this
is the default channel used by
the modem.
In the new menu screen you must enter new
values for the VPI and VCI settings. You also
must choose the Encapsulation method used
(LLC or VC Mux) from the pull-down menu. Your
service provider will supply this information.
Note: The default settings for the modem are VPI of “0” and a VCI
of “35”. The default encapsulation method used is LLC.
Click Ok
Click Update
Click Set
admin