D-Link DSL-514 Network Router User Manual


 
DSL-514 ADSL Router User’s Guide
2
Product Features
The D-Link DSL-514 ADSL Router provides the following features:
Data rates up to 8 Mbps for downstream and 1M bps for upstream
Friendly web-based graphical user interface for configuration and management
Supports up to eight simultaneous virtual connections for a single ADSL account
Supports T1.413 issue 2, G.dmt and G.lite standards
Auto-handshake and rate adaptation for different ADSL flavors
Widest range of DSLAM interoperability
Bridge IP over ATM LLCSNAP (RFC 1483)
Built-in MIBs for SNMP management
Upgradeable firmware through HTTP
Front Panel
Place the Router in a location where the LED indicators can be easily viewed.
The LED Indicators read as follows:
Power
Steady green light indicates the unit is powered on.
Status
Blinking green indicates normal operation.
Local Network
A solid light indicates a connection, a blinking light indicates data
transmission to an Ethernet-enabled computer on ports 1-4.
ADSL: Link/Act
Steady green light indicates a valid ADSL connection. This will light after the ADSL
negotiation process has been settled. Blinking green light indicates an active WAN session.