Filter
Top Products
DSL-564T ADSL Router User’s Guide
41
Figure 4- 6. Port Forwarding User Rules Management
2. Type a Rule Name in the space provided.
3. Select the port Protocol from the pull-down menu - you may select TCP, UDP or both (TCP/UDP).
4. Configure a range of ports for forwarding. Type the lowest numbered port in the range in the Port Start
space. Type the highest numbered port in the Port End space. For a single port, just enter the same
number in both spaces.
5. Type a number for the Port Map in the space provided. This is the local port being forwarded to.
6. Click the
Apply
button to create the new rule. The new rule will appear listed in the table of custom
port forwarding rules.