Filter
Top Products
2
Connecting the Router to your
Computer
1. First, connect the power adapter to the power input at the back
panel of the DSL-G604T and then plug the other end of the
power adapter to a wall outlet or power strip. On the front of
the device, the Power LED will turn ON to indicate proper
operation.
2. Insert one end of the Ethernet cable into an Ethernet port on
the back panel of the DSL-G604T and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
3. Insert the telephone cable included with the Router into the
ADSL port, and then connect the cable to your telephone line.
(Line must be activated for ADSL use)
4. Check the LED display on the front of the Router to confirm
that the connections have been made. (This will be shown with
solid lights for the corresponding port)
ADSL Port
Connect to
your ADSL
p
hone line
Antenna
Post
Connect
antenna here
Ethernet Ports
Connect to
Ethernet cable
Power Input
Connect to
p
ower ada
p
ter