Filter
Top Products
7
its power adapter into a power outlet will immediately power
it on.
Auto-MDI Jacks:
These jacks supports automatic MDI/MDIX crossover detection
function gives true ‘plug and play’ capability without the need of
confusing crossover cables or crossover ports.
With the Auto-MDI function, you just need to plug-in the network
cable to the hub directly and no need to care if the end node is NIC
(Network Interface Card) or switches and hubs.
LED Indicators
Power Indicator (PWR)
This LED indicator lights green when the hub is receiving power,
otherwise, it is off
Link/Act:
This indicator light green when the port is connected to a station, if the
indicator blinking will be transmitting or received data on the
network.
100M:
If this indicator light green, mean this port is connected to a 100M
Fast Ethernet station. Otherwise, this indicators reminds off, mean this
port is connected to a 10M Ethernet station.
FDX/COL:
This LED indicator light green when a respective port is in full duplex
(FDX) mode. Otherwise, it is blinking when collisions are occurring
on the respective port