Filter
Top Products
26D-Link DWM-156 User Manual
Section 9 - SIM Management
Enabling or Disabling a PIN Code
Enable PIN Code
To prevent unauthorized use of the SIM card a PIN code can be enabled.
Select 1. Tools > Enable/Disable PIN code > Enabled.
Enter the correct PIN code to enable.2.
Click 3. OK to enable PIN code protection.
If a PIN number has been enabled, you will always be asked to enter it before
accessing the D-Link Mobile Connection Manager software.
Disable
If a PIN code is no longer required, you may disable it via the following
steps.
Click 1. Tools > Enable/Disable PIN code > Disabled.
Enter the correct PIN code.2.
Click 3. OK to disable the PIN.
Note: The PIN is provided by your network service provider.
Warning: The PIN code must be entered correctly within three tries. Failure
to do so will cause the SIM card to become locked.