Filter
Top Products
Vigor2700Ge/e User’s Guide
59
Mode Disable-Turn off the encryption mechanism. For the security of your
router, please select any one of the encryption mode here.
WEP-Accepts only WEP clients and the encryption key should be
entered in WEP Key.
WPA/PSK-Accepts only WPA clients and the encryption key
should be entered in PSK.
WPA2/PSK-Accepts only WPA2 clients and the encryption key
should be entered in PSK.
Mixed (WPA+ WPA2)/PSK - Accepts WPA and WPA2 clients
simultaneously and the encryption key should be entered in PSK.
WPA The WPA encrypts each frame transmitted from the radio using the
key, which either PSK (Pre-Shared Key) entered manually in this
field below or automatically negotiated via 802.1x authentication.
Either 8~63 ASCII characters, such as 012345678(or 64
Hexadecimal digits leading by 0x, such as "0x321253abcde...").
WEP For key length 64 bits - For 64 bits WEP key, either 5 ASCII
characters, such as 12345 (or 10 hexadecimal digitals leading by 0x,
such as 0x4142434445.)
For key length 128 bits - For 128 bits WEP key, either 13 ASCII
characters, such as ABCDEFGHIJKLM. (or 26 hexadecimal digits
leading by 0x, such as 0x4142434445464748494A4B4C4D)
All wireless devices must support the same WEP encryption bit size
and have the same key. Four keys can be entered here, but only one
key can be selected at a time. The keys can be entered in ASCII or
Hexadecimal. Check the key you wish to use.
3
3
.
.
6
6
.
.
4
4
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right via the MAC address of wireless client. Only the valid MAC address
that has been configured can access the wireless LAN. By clicking the Access Control, a new
web page will appear as shown below. You could edit the clients' MAC addresses to control
their access rights.