Filter
Top Products
5
AUTO Menu
With the AUTO menu, the four items shown in the Table below can
be performed.
Please perform each operation in accordance with the instructions
in the Table.
Item Description
ADJUST
Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H
PHASE, and H SIZE. Use this function with the maximum window size.
Auto Adjust (for VIDEO/S-VIDEO): This function automatically selects the
appropriate signal mode depending on input signals. This is only performed if
AUTO is selected on the VIDEO menu item ( ) of the INPUT menu.
• This function may not be available with a PAL60 signal and certain other
signals.
• The AUTO mode operation requires approximately 10 seconds.
•
For COMPONENT VIDEO, the signal type is identified automatically even if this
function is inactive. For more information on HDTV signals, see HDTV. ( )
KEYSTONE
Automatic keystone distortion correction:
You can automatically correct vertical keystone distortion corresponding to the
angle (forward/backward tilt) at which the unit is set up.
• If the projection screen is inclined, or if the projector is angled downwards, it
may not be possible to make the correct adjustment when V: INVERT or H&V:
INVERT is selected under the MIRROR item of the MAIN menu.
• When the zoom adjustment is set to the TELE side, automatic correction may
be excessive. The automatic correction function should be used with zoom
set to WIDE whenever possible.
POWER OFF
Adjust POWER OFF Time:
Long (MAX. 99 min.) Short (Min. 1 min.) (DISABLE: 0 min.)
If the time set here passes without valid signal input (there is no signal input, or
signal input is out of specifications), the standby mode is set (see "TURNING
ON THE POWER" Vol.1 ). This function is inactive when DISABLE (0 min.) is
selected.
ONE TOUCH
Enabling/disabling the KEYSTONE function using the ONE TOUCH
button:
TURN ON TURN OFF
Pressing the ONE TOUCH button will automatically retrieve pictures and
automatically adjust the screen (see “ADJUSTING SCREEN WITH ONE-
TOUCH”
Vol.1
), and you can also set the function to execute KEYSTONE
(see above in this table) simultaneously when pressed. KEYSTONE will be
executed if TURN ON is selected.
Example : AUTO Menu
(ADJUST)
AUTO Menu
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
ADJUST
KEYSTONE
POWER OFF
ONE TOUCH
EXECUTE
4
4
15
23