Filter
Top Products
36
SETUP menu
Item Description
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL
ó
H:INVERT
ó
V:INVERT
ó
H&V:INVERT
If the Transition Detector is on and MIRROR status is changed,
TRANSITION DETECTOR ON alarm (
59) will be displayed when
projector is restarted after the AC power is turned off.
STANDBY MODE
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL
ó
SAVING
When SAVING is selected, the power consumption in the standby
mode is lowered with some functional restriction as below:
• When SAVING is selected, the RS-232C communication control
except to turn the projector on and the network function are disabled
while the projector is in the standby mode. If the COMMUNICATION
TYPE in the COMMUNICATION menu is set to NETWORK
BRIDGE, all of the RS-232C commands are disabled (
48).
• When SAVING is selected, AUDIO OUT STANDBY setting of
AUDIO SOURCE (
37) is invalid, and no signal is output from
AUDIO OUT port in the standby mode.
MONITOR OUT
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
MONITOR OUT port while an image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using ▲/▼ buttons.
• Choose STANDBY, to select the output
signal from the MONITOR OUT port in the standby mode.
STANDBY settings can be selected individually for NORMAL or
SAVING, which is selected in the STANDBY MODE (
above).
(2) Select one of the COMPUTER IN ports using ◄/► buttons.
Choosing the COMPUTER IN1 allows the following choice.
COMPUTER IN1
ó
OFF
Choosing the COMPUTER IN2 allows the following choice.
COMPUTER IN2
ó
OFF
Choosing other input or STANDBY allows the following choice.
COMPUTER IN1
ó
COMPUTER IN2
ó
OFF
• OFF disables the MONITOR OUT port.
• Initial settings for STANDBY are the following: COMPUTER IN1
when NORMAL is selected in STANDBY MODE; and OFF when
SAVING is selected in STANDBY MODE.
COMPUTER IN1
ó
COMPUTER IN2
STANDBY
COMPONENT
VIDEO
ó
S-VIDEO
ó
(Y, Cb/Pb, Cr/Pr)