Dymo 100 Printer User Manual


 
How to use your
Dymo LabelPoint 100
What LabelPoint can do for you
With the Dymo LabelPoint you can create a
wide variety of high-quality self-adhesive
labels. The unit can print on 3/8" (9 mm) or
1/2" (12 mm) width tapes. Dymo tape casettes
are available in a wide range of colors: split
back tape for easy removal from the tape.
Warranty Registration
Please complete the warranty registration
card and return it to the relevant customer
service address, within seven days– see the
warranty booklet for details.
Getting started
STEP ONE - insert the batteries
Apply pressure to thumb catch and open
hinged access door – see fig A, page 2.
Insert six size AAA alkaline batteries,
observing the polarity markings A3, and
close cover.
Remove batteries if the unit is to remain
unused for prolonged period.
STEP TWO - insert the cassette
Slide catch B1 as shown to open cassette
door B2 – see page 2.
Ensure tape and ribbon B3 are taut across
mouth of cassette and tape passes
between guideposts before installing as
shown. If necessary, turn spool B5 clockwise
to tighten ribbon.
Insert cassette and push firmly C3 until it
clicks into place.
When the tape cassette is pushed firmly
into place, the unit automatically adjusts
the tension of the tape. You will hear a
slight noise as the tape is being tightened.
Ensure tape and ribbon are positioned as
shown between pinch roller C1 and print
head C2.
Close door B2
STEP THREE - turn on
Turn on with the switch.
Note: The unit turns off automatically,
after 2 minutes of inactivity.
3