Dymo 40149 Switch User Manual


 
2
Using the Scale
Always wait for
0.0
to display before placing an item on the scale
platform.
After placing an item on the scale, wait for several seconds for the
weight to appear. When the scale is ready, a
{
appears to the left of
the weight.
To weigh an item
Place an item on the scale platform.
Lift the top of the scale platform to a 90-degree position
and place large envelopes in an upright position on the
platform
Using the Tare Button
You can weigh small items or items that cannot be easily
placed on the scale platform by placing the items in a
container and using the Tare button to eliminate the weight
of the container.
Pressing the Tare button always returns the scale to zero.
To use the Tare button
1. Place an empty container on the platform.
2. When the scale is ready, press the
Tare
button. The display is set to zero.
3. Place the items to be weighed in the container.
The display shows the weight of the items, without the weight of the container.
4. After removing the container, press
Tare
to reset the scale to zero.
Using the Hold Button
When an item being weighed extends over the front of the scale and you cannot see the
display, you can freeze the display using the Hold button.
To use the Hold button
1. Place the item on the scale.
2. After a few seconds, press the
Hold
button and remove the item from the scale.
The weight continues to be displayed for about six seconds.
Changing the Units of Measure
Your scale can display weight in English (pounds) or metric (kilograms) units. The default unit
of measure is English.
To change the units of measure
Press the
Kg/Lb
button to toggle between English and metric units.
°
LB
OZ
!