Dynex DX-E202 Network Card User Manual


 
10/100Mb CardBus Network Card
3
Important safety instructions
Before getting started, read these instructions and save them for later reference.
Before you install your CardBus network card into your computer, read this user guide.
In some operating systems, the driver must be installed before you install your card.
Do not drop or hit your network card.
Do not install your network card in a location that is subject to strong vibrations
because vibration may damage your card.
Do not disassemble or try to modify your network card.
Disassembly or modification may void your warranty and could damage your network
card leading to a fire or electric shock.
Do not store your network card in a damp location. Do not allow moisture or liquids to
drip into your card. Liquids can damage your card leading to a fire or electric shock.
Do not insert metal objects, such as coins or paper clips, into your network card.
Your network card is for general computer use. Do not use your card in a computer that
requires exceptional reliability, especially if a breakdown or malfunction of your card
might jeopardize life or health, such as aerospace equipment, atomic power control
systems, traffic-related equipment, transportation equipment, industrial robotics,
combustion equipment, safety devices, and life-support systems.
Features
Compliance with the IEEE802.3 (10 Base-T) and IEEE802.3u Fast Ethernet (100
Base-TX) specifications
Support for full-duplex flow control (IEEE 802.3x) for improved performance
Support for auto-negotiation, which automatically selects IRQ and I/O addresses
Compliance with the PC Card type II and 32-bit CardBus standards
PC Card (68-pin) and Network (RJ-45) connectors
Hot-swappable, Plug-and-Play operation (you can insert or remove the card without
turning off your computer.)
One LED to indicate network link and activity (the LED is ON when a link is established
and flashes when data is being transferred.)
One LED to indicate duplex operation (the LED is ON when the card is operating in full
duplex.)
Package contents
Make sure that the package contains the following items:
DX-E202 10/100Mb Cardbus Network Card
CD containing drivers and install guide
This installation guide
Dynex-A5-ENG.fm Page 3 Wednesday, October 21, 2009 10:04 AM