Dynex DX-PCIGB Network Card User Manual


 
Package contents
5
Package contents
Make sure that the package contains the following items:
DX-PCIGB Gigabit PCI Adapter
CD containing drivers and manuals
Low profile bracket
This manual
Installing the adapter
Caution: Opening your computer's case may void your computer's
warranty. Contact your computer's manufacturer before opening
the case to make sure that you do not void the warranty. You may
need to have the adapter installed by your computer's
manufacturer or an authorized computer technician.
Caution: Before touching any electronic components, make sure
that you first touch an unpainted, grounded metal object to
discharge any static electricity stored on your clothing or body.
To install your adapter:
1 Turn off your computer and unplug the power cord and all
cables.
2 Remove your computer's case cover. See your computer's
user guide for information about removing the cover.
3 Locate an available PCI slot. PCI slots are usually white.
4 Remove the screw that secures the backplate (the small
piece of metal that covers the opening for PCI card on the
back panel of your computer), then remove the backplate.
5 If the bracket on the DX-PCIGB is too tall to fit your
computer's case, remove the bracket and replace it with the
included low profile bracket.