Filter
Top Products
Cross-Cut Paper Shredder
Contents
Important safety instructions....................................................................2
Features ....................................................................................................4
Package contents......................................................................................4
Setting up the shredder ............................................................................6
Using the shredder....................................................................................6
Maintaining ..............................................................................................7
Troubleshooting........................................................................................8
Specifications............................................................................................9
One-year limited warranty......................................................................11
Important safety instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Keep out of reach of children and pets.
6 Do not use this unit near water.
7 Clean only with dry cloth. The housing can be cleaned with a cloth dampened with mild soap
and water, then dried thoroughly.
8 Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with
one wider than the other. The wide blade is provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9 Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10 The wall plug is the disconnecting device. The plug must remain readily operable.
11 RISK OF FIRE. Never use any petroleum based or flammable oils or lubricants in or around the
machine as some oils can combust causing serious injury.
DX-PS06CC_13-0652 MAN_V2_ENG.fm Page 2 Thursday, June 27, 2013 2:04 PM