Filter
Top Products
4
DX-PS12CC
Setting up the shredder
Warning: Crosscut shredders have very sharp exposed blades on the underside. Use care
when mounting the shredder on the wastebasket.
Caution: The shredder should not be plugged in during assembly.
Note: The following illustrations are for information purposes only. Your actual shredder may
look somewhat different than the shredder shown.
To set up the shredder:
1 Carefully lift and remove the shredder head from the wastebasket.
2 Firmly press all four caster wheels into the bottom of the shredder body.
DX-PS12CC_12-0052 MAN_V1.fm Page 4 Friday, February 3, 2012 7:59 AM