Filter
Top Products
PXES4P Switches Installation and User Guide (10/06)
29
three to eight) PXES4P Series Switches, with their power supplies plugged into power
strips (not included) in the rear area of the tray. Metal mounting screws in the bottom-front
hold the Media Converters firmly in place. The beveled-top edge of the units permit the
LEDs of each unit to be viewed for operational status, even when the units are very close
together.
3.4 DIN-Rail mounting option
PXES4P Switches, designed for use in “Factory Floor” Industrial Ethernet
environments, are also available for DIN-Rail mounting in an enclosure having DIN Rails.
The metal DIN-Rail mounting hardware is optional and needs to be ordered as a
separate item, e.g. Model # PXESDINRL. It comes with four screws to attach the bracket
to the unit. The Rail clip is spring-loaded with a pull-up latch at the top for easy “snap-on”
attachment and removal.
The PXES4P Models with “HR” have 24VDC power, and have the PXESDINRL
bracket included and assembled with the MC unit at the factory.