Filter
Top Products
Intelligent Technologies (IT.) QSNAP
Pub. No. MN05001001E
21
February 2002
Appendix A: QSNAP Parameters
Refer to the following table when configuring the QSNAP.
Table 21: Configuration Parameters
Number Parameter Length Units
1 Config Data 14
2 Configuration CRC check 2
3 Node ID 2
4 QCPort mode 1
5 Baud Rate 1
6 Slave Address 1
7 Production Dest 2
8 Device ID Tag 16
9 Prod Int 2
10 Cons Int 2
11 Parameter List 0
12 Production List 0
13 Consumption List 0
32 Overload Trip FLA Value 4 Amps
33 Overload Trip Class Value 1 Class
34 Percent Initial Torque 1 %
37 Motor Start Ramp Time 2 mS
38 Motor Stop Ramp Time 2 mS
43 Current Threshold Warning Threshold 1 En/Dis
44 Current Threshold Warning Threshold 1 %
46 Current Threshold Warning Debounce 2 mS
51 Motor Underload Warning Level 1 En/Dis
52 Motor Underload Warning Level 1 %
54 Motor Underload Warning Debounce 2 mS
55 Motor Ground Fault Enable 1 En/Dis
56 Motor Ground Fault Debounce Time 2 mS
57 Motor Ground Fault Inhibit From Start Delay Enable 1 En/Dis
58 Motor Ground Fault Inhibit From Start Delay 1 S