Filter
Top Products
Connecting the USB Hard Drive to an IBM PC-Compatible or Macintosh System
6 TEAC USB Hard Drive Installation Guide
Figure 5. Connecting the Power Adapter and Cable
6. Connect the wider plug of the included USB 2.0 cable to a USB port on
your computer (Figure 6).
Figure 6. Connecting to USB Port on Computer
7. Connect the other end of the USB 2.0 cable to the USB 2.0 port on the
rear panel of the USB hard drive (Figure 4 on page 5).
8. Turn on the power switch on the USB hard drive.
Confirm that the Power LED on the USB hard drive lights up.
Note:
If you are connecting the cable to a USB 2.0 hub, use a USB hub that
features an AC power adapter. Connect the cable directly to a USB 2.0 port
on the computer or USB hub. Do not connect the cable to a USB connector
on the keyboard.
Note:
If you have an IBM PC-compatible, continue with the “Installing the
Driver Software” on page 7. If you have a Macintosh system, continue with
“Macintosh System Installation” on page 11.
to USB
DC IN
Hard Drive
Power Input
to AC outlet
power cable
AC power adapter
Step 4
Step 3
Step 5
USB 2.0/1.1 port
USB 2.0 cable
on computer
Step 6