Filter
Top Products
Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
This example of installation is based on 8 port KVM Switch and 16 port KVM Switch have
the same installation procedures
Step 1
Find a convenient place to put your KVM Switch. Its 19” rack mount form factor makes it
ideal stackable on 19” rack. When stacking to a rack, attach the included brackets to the
sides of the KVM Switch. Take note of the length of your cables so that your computers,
KVM Switch, keyboard, mouse and monitor are distanced properly.
Step 2
Connect the monitor to the KVM Switch. Using the attached cable, or the one included with
your monitor, connect it to the HD DB-15 female port on the back of the KVM unit labeled
with the monitor symbol at the CONSOLE port connector.
Step 3
Connect the keyboard to the KVM Switch. If you have an AT type keyboard, you will need
an AT to PS/2 adapter.