(2) LED
LED Status Description
On
Power is supplied
System
Power
Off
No Power
On
Collision detected in
this segment
FUL/COL
(Full Duplex/Collision)
Off
No Collision
On
A valid link is
established
Flash
Data packets
received
LNK/ACT
(Link/Activity)
Off
No link is established
On
This port run at
100Mbps
Normal
Port
100M
(100Mbps)
Off
No connected or run
at 10Mbps
On
This group is in
setting mode
Group
Off
This group is not in
setting
On
This port is in setting
mode
Port
Off
This port is not in
setting mode
On
This port is selected
Setup
Status
Status
Off
This port is not
selected
On
VLAN is in setting mode
VLAN
Off
VLAN is not in setting mode
On
Trunking is in setting mode
TRUNK
Off
Trinking is not in setting mode
On
Speed is in setting mode
10/100M
Off
Speed is not in setting mode
On
Full/Half duplex is in setting
mode
FULL/HALF
Off
Full/Half duplex is not in
setting mode
On
Save function is in setting
mode
Setup
Function
SAVE
Off
Save function is not in setting
mode