Filter
Top Products
26
disable, the group is local static trunking group.
All ports support LACP dynamic trunking group. If connecting
to the device that also supports LACP, the LACP dynamic
trunking group will be created automatically.
3. Work ports: Allow max four ports can be aggregated at the
same time. If LACP static trunking group, the exceed ports is
standby and able to aggregate if work ports fail. If local static
trunking group, the number must be as same as the group
member ports.
4 Select the ports to join the trunking group. Allow max four
ports can be aggregated at the same time.
5. If LACP enable, you can configure LACP Active/Passive
status in each ports on State Activity page.
6. Click Apply.
4.5.2 Aggregator Information
When you are setting LACP aggregator, you can see relation
information here.
1. This page is no group active. LACP don’t working.
2. This page is Static Trunking group.